Walabot Stud Finder Coupon Code

The Walabot stud finder has been one of the most talked about new products in the home repair industry.

Many DIY’ers and contractors have been putting this new and improved stud finder to the test with great results.

To get a 10% discount on the Walabot stud finder just click the button below to reveal a 10% coupon code.

What is the Walabot DIY Able to Detect?

Walabot DIY is ideal for detecting studs, pipes, wires, and movement within 4 inches /10 centimeters in drywall and concrete walls.

It can detect the following: wood and metal studs, metal pipes, PVC/plastic pipes, wires, conduit, and re-bar.

It can also detect movement such as rodents running through the wall, termite nests, and beehives.

Walabot DIY is a device that uses Radio Frequency (RF) technology to see into drywall/concrete walls to identify studs, pipes, wires, and movement.

It connects to your Android phone via USB cable and works through an app found on the Google Play Store.

The app is free to download and can be found by searching Walabot DIY in the PlayStore.

Note: The app cannot work without the Walabot DIY device and currently is only available for Android devices.

The video below will give you an overview of the Walabot DIY is used for, what materials it detects, and how it’s able to see through walls!

You’ll need to calibrate your Walabot DIY to the specific wall you’ll be working on:

Place the Walabot DIY firmly against the wall and push ‘Calibrate’.
Press ‘Start Scan’ and move the device in a circular or figure-eight motion, covering at least 16-inches for the best results.
Once Walabot DIY familiarizes itself with your wall it can look through it to see studs, pipes, wires, and more.
Remember to repeat this process if you switch to a new wall

Hold the Walabot stud finder against the wall, and press ‘Start Scan’ moving the Walabot DIY in large circular motions to calibrate it.
Begin with Pan Mode to get a panoramic view of the wall, and a basic overview of where the studs are.
Switch to Images Mode for a closer look. If a stud was found, you’ll see a stud graphic on your phone.
To find the stud’s center, switch to Expert Mode. Move the Walabot DIY slowly over the stud, and adjust the intensity bar if necessary.
Make sure the image is centered, then mark the center of the stud on your wall.

In Images Mode, Walabot DIY will not show two images onscreen at the same time. You may get a message “Nearby objects detected” or your image will flicker onscreen.
Move the Walabot DIY around in a wider area to determine if there is a second object.
If you’re following the path of a pipe or wire which seem to curve, rotate your phone and keep it parallel with the pipe or wire as you continue to scan, as shown in the video.
To get a better understanding of what’s happening, or more accurately track a curved pipe or wire, switch to Expert Mode.